News result Industrial Automation

Triconex Safety Instrumented Systems: Configuring Modbus TCP Communication for Process Protection
Zhang Wei

Triconex Safety Instrumented Systems: Configuring Modbus TCP...

Step-by-step SIS integration guide covering Triconex Tricon TXP Modbus TCP configuration, register mapping, DeltaV DCS client setup, and systematic troubleshooting for oil and gas process protection.
HART Loop Diagnostics on Emerson and Yokogawa Transmitters: A Field Step-by-Step Guide
Zhang Weiming

HART Loop Diagnostics on Emerson and Yokogawa Transmitters: ...

A field step-by-step guide to HART loop diagnostics on Emerson Rosemount 3051S and Yokogawa EJA110E transmitters — covering physical layer verification, burst mode conflicts, noise troubleshooting, and multidrop addressing traps.
Allen-Bradley EtherNet/IP Configuration Guide: CIP Messaging with Logix 5000 Controllers
Lin Xiaoming

Allen-Bradley EtherNet/IP Configuration Guide: CIP Messaging...

A practical guide to EtherNet/IP network setup, Studio 5000 controller configuration, CIP tag-based data exchange, and troubleshooting for Allen-Bradley ControlLogix and CompactLogix systems.
Yokogawa Centum VP Configuration: Implementing HART Protocol Integration for Field Instrumentation
Wang Fang

Yokogawa Centum VP Configuration: Implementing HART Protocol...

Complete guide to HART communication setup with Yokogawa CENTUM VP, covering ALF111 module configuration, FOUNDATION Fieldbus comparison, and a practical Emerson 3051S transmitter integration example.
Triconex Modbus TCP Configuration Guide: SIS Integration with Third-Party Controllers
Schneider Electric / Triconex

Triconex Modbus TCP Configuration Guide: SIS Integration wit...

A practical step-by-step guide to configuring Modbus TCP on Triconex Tricon CX controllers, covering TCM installation, TriStation register mapping, IP configuration, and common fault diagnostics for SIS-DCS integration.
Integrating a PowerFlex 525 Drive over EtherNet/IP in Studio 5000: IP Setup, Produced Tags, and RPI Tuning
Wang Xiaolei

Integrating a PowerFlex 525 Drive over EtherNet/IP in Studio...

A practical guide to IP setup, produced tags, RPI tuning, and Device Level Ring configuration for PowerFlex 525 drives integrated over EtherNet/IP in Studio 5000.