Speed hunting on a Woodward 505E digital governor causes compressor surge, excess fuel burn, and mechanical fatigue on GE Frame 5 gas turbines. This guide covers the five root causes of governor hunting, step-by-step PID tuning procedures, actuator output calibration, and emergency overspeed test protocols to restore stable ±5 RPM speed control.
Engineers often configure Modbus RTU networks and forget about baud rate until something breaks. A mismatch between master and slave baud settings causes silent communication failure—no error flag, no alarm, just frozen data. This article digs into why baud rate selection is not a one-size-fits-all decision. Cable length, slave count, electromagnetic interference level, and payload size all push the optimal value in different directions.
Choosing a selection results in a full page refresh.
