{"product_id":"ge-fanuc-emerson-ic200cbl001-versamax-cpu-programming-cable","title":"GE Fanuc Emerson IC200CBL001 Versamax CPU Programming Cable","description":"\u003ch2\u003eGE Fanuc Emerson IC200CBL001 Versamax CPU Programming Cable\u003c\/h2\u003e\n\u003cp\u003eConfigured for PLC programming and serial data communication through the RS-232 interface, the \u003cstrong\u003eGE Fanuc Emerson IC200CBL001\u003c\/strong\u003e (\u003cstrong\u003eIC200CBL001\u003c\/strong\u003e CPU Programming Cable) provides a straight-through connection to RS-232 Port 1 on the PLC cable assembly. The cable uses a 9-pin D-sub connector configuration, copper conductors, shielding, and supports data rates up to 115,200 bps.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200CBL001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc Emerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eVersamax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eCPU Programming Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.31 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eMaximum 80 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot applicable; passive cable assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eStraight-through RS-232 serial cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eCrimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Configuration\u003c\/td\u003e\n\u003ctd\u003e9-pin D-sub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e15 m (50 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Rate\u003c\/td\u003e\n\u003ctd\u003eMaximum 115,200 bps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor Material\u003c\/td\u003e\n\u003ctd\u003eCopper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Size\u003c\/td\u003e\n\u003ctd\u003e24 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Shield\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Rating\u003c\/td\u003e\n\u003ctd\u003e30 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePLC Port\u003c\/td\u003e\n\u003ctd\u003eRS-232 Port 1 on PLC cable assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRS-232 Serial Interface Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe IC200CBL001 provides a straight-through RS-232 signal path for PLC programming and serial communication. The specified maximum data rate is 115,200 bps. The 15 m cable assembly uses 24 AWG copper conductors with a cable shield and a 30 V voltage rating.\u003c\/p\u003e\n\u003cp\u003eThe supplied data does not specify backplane bus communication, EtherNet\/IP, PROFINET, firmware compatibility, or I\/O channel functions for this cable. It should therefore be treated as a physical serial programming cable rather than a PLC backplane or network interface module.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What PLC interface does the IC200CBL001 use?\u003cbr\u003eA: The cable is specified for RS-232 Port 1 on the PLC cable assembly and uses a straight-through RS-232 configuration.\u003c\/p\u003e\n\u003cp\u003eQ: What is the maximum specified communication rate?\u003cbr\u003eA: The maximum specified data rate is 115,200 bps.\u003c\/p\u003e\n\u003cp\u003eQ: Is the IC200CBL001 an active electronic module?\u003cbr\u003eA: No. The supplied specifications identify it as a passive CPU programming cable. No power consumption specification is provided.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify that the PLC interface is RS-232 Port 1 before connection.\u003c\/li\u003e\n\u003cli\u003eConfirm the 9-pin D-sub connector configuration and mating interface before installation.\u003c\/li\u003e\n\u003cli\u003eRoute the cable separately from high-current power conductors where practical to reduce electrical interference.\u003c\/li\u003e\n\u003cli\u003eMaintain the cable shield according to the control-system grounding and shielding practice used at the installation.\u003c\/li\u003e\n\u003cli\u003eAvoid excessive bending, crushing, or mechanical loading of the 24 AWG conductors.\u003c\/li\u003e\n\u003cli\u003eConfirm that the installation environment does not exceed the specified maximum temperature of 80 deg C.\u003c\/li\u003e\n\u003cli\u003eDo not apply voltage beyond the specified 30 V cable rating.\u003c\/li\u003e\n\u003cli\u003eVerify serial communication settings at the connected PLC and programming equipment before initiating data transfer.\u003c\/li\u003e\n\u003cli\u003eInspect the crimped terminations and connector housing for mechanical damage before commissioning.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE","offers":[{"title":"Default Title","offer_id":43672079401027,"sku":"IC200CBL001","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5810\/3107\/files\/IC693CBL341.jpg?v=1758540749","url":"https:\/\/www.plcdcspro.com\/th\/products\/ge-fanuc-emerson-ic200cbl001-versamax-cpu-programming-cable","provider":"PLC DCS Pro Ltd.","version":"1.0","type":"link"}