{"product_id":"remote-xcvr-module-woodward-5466-1036-micronet-plus","title":"Remote XCVR Module | Woodward 5466-1036 MicroNet Plus","description":"\u003cp\u003eThe Woodward \u003cstrong\u003e5466-1036\u003c\/strong\u003e is a \u003cstrong\u003eRemote Real-Time Network Transceiver (XCVR) Module\u003c\/strong\u003e for the MicroNet Plus digital control platform. It provides high-speed Ethernet communication across four RJ-45 ports, enabling distributed I\/O and remote node connectivity in turbine and engine control systems. The module features comprehensive front-panel diagnostics with seven status LEDs for rapid fault identification.\u003c\/p\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Real-Time Network Transceiver (Remote XCVR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet Ports:\u003c\/strong\u003e 4 × RJ-45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel LEDs:\u003c\/strong\u003e 7 total (including 2 per Ethernet port)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1.0\" × 10.5\" × 10.0\" (2.5 × 26.7 × 25.4 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 lb 12 oz (0.8 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Colors:\u003c\/strong\u003e Black sides, gray faceplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e VME board design for streamlined chassis installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReset Function:\u003c\/strong\u003e Front-panel reset switch + remote reset signal support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoder Compatibility:\u003c\/strong\u003e Versions 4.06 to 5.04\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e CSA, ATEX, CE (LVD and EMC), ABS, DNV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual:\u003c\/strong\u003e 26166V1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNetwork \u0026amp; Diagnostic Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-Time Ethernet:\u003c\/strong\u003e Dedicated high-speed communication for deterministic control loops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Port Design:\u003c\/strong\u003e 4 RJ-45 ports support daisy-chain and redundant network topologies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Diagnostics:\u003c\/strong\u003e Individual port status, link activity, and module health indicators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Reset:\u003c\/strong\u003e Supports remote reset commands from the main CPU or engineering station\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVME Integration:\u003c\/strong\u003e Standard VME form factor for direct MicroNet Plus chassis mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower down the MicroNet Plus chassis before inserting the module.\u003c\/li\u003e\n\u003cli\u003eAlign the VME connector with the backplane slot and apply even pressure until seated.\u003c\/li\u003e\n\u003cli\u003eSecure the module with chassis retention screws to prevent vibration displacement.\u003c\/li\u003e\n\u003cli\u003eConnect Ethernet cables to RJ-45 ports 1–4 based on your network topology diagram.\u003c\/li\u003e\n\u003cli\u003ePower up the chassis and verify all LEDs illuminate during self-test.\u003c\/li\u003e\n\u003cli\u003eCheck Ethernet link LEDs for solid green (link established) or flashing (data activity).\u003c\/li\u003e\n\u003cli\u003eConfigure network parameters using Coder software version 4.06 or later.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What Coder versions are compatible?\u003c\/strong\u003e\u003cbr\u003eA: The 5466-1036 is compatible with Coder versions 4.06 through 5.04.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can the module be reset from the front panel?\u003c\/strong\u003e\u003cbr\u003eA: Yes, a dedicated reset switch is located on the front faceplate; remote reset via software is also supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What do the Ethernet LEDs indicate?\u003c\/strong\u003e\u003cbr\u003eA: Each port has 2 LEDs: one for link status (solid = connected) and one for data activity (flashing = traffic).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is this module manufactured in the USA?\u003c\/strong\u003e\u003cbr\u003eA: Yes, the 5466-1036 is manufactured in Fort Collins, Colorado, USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSelection Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify your Coder software version is 4.06 or higher before integrating this module.\u003c\/li\u003e\n\u003cli\u003ePlan network cabling for daisy-chain or star topology using all four RJ-45 ports.\u003c\/li\u003e\n\u003cli\u003eFor redundant communication paths, deploy two 5466-1036 modules in separate chassis slots.\u003c\/li\u003e\n\u003cli\u003eConfirm ATEX\/CSA certifications match your hazardous area classification requirements.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Woodward","offers":[{"title":"Default Title","offer_id":43743602966595,"sku":"5466-1036","price":216.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5810\/3107\/files\/5466-10362_a0cd26a5-057e-4d09-b7a2-63d04529f74a.jpg?v=1788328676","url":"https:\/\/www.plcdcspro.com\/products\/remote-xcvr-module-woodward-5466-1036-micronet-plus","provider":"PLC DCS Pro Ltd.","version":"1.0","type":"link"}