{"product_id":"fuji-electric-np1l-pd2-local-power-supply-module","title":"FUJI Electric NP1L-PD2 Local Power Supply Module","description":"\u003ch3\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eNP1L-PD2\u003c\/strong\u003e is a local power supply module for the MICREX-SX SPH series. When combined with a PROFIBUS-DP master communication module, it enables Fuji Electric PLCs to act as master devices on a PROFIBUS-DP fieldbus network. This setup allows centralized control over distributed I\/O and intelligent devices such as drives, sensors, and remote terminals.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePROFIBUS-DP Master Integration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eTo enable PROFIBUS-DP master functionality, the following components are required:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNP1L-PD2\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSupplies regulated power to local modules\u003c\/li\u003e\n\u003cli\u003eMounts on local base unit\u003c\/li\u003e\n\u003cli\u003eRequired for powering the PROFIBUS-DP master module and adjacent I\/O\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNP1L-RD2 or NP1L-RD1\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eLocal base unit for mounting communication modules\u003c\/li\u003e\n\u003cli\u003eProvides backplane connectivity for power and data\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNP1L-CV (optional)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eLocal CPU module if PROFIBUS-DP master is used in a standalone local segment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNP1L-MP1 or NP1L-MP2\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003ePROFIBUS-DP master communication module\u003c\/li\u003e\n\u003cli\u003eEnables MICREX-SX SPH to act as a master on PROFIBUS-DP\u003c\/li\u003e\n\u003cli\u003eSupports baud rates from 9.6 kbps to 12 Mbps\u003c\/li\u003e\n\u003cli\u003eConfigurable via Fuji SX-Programmer or GSD file in third-party tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Highlights of PROFIBUS-DP Master Module\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol:\u003c\/strong\u003e PROFIBUS-DP V1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Slaves:\u003c\/strong\u003e Up to 126 devices per segment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagnostics:\u003c\/strong\u003e Supports cyclic and acyclic data exchange, alarm handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eGSD file import for third-party device mapping\u003c\/li\u003e\n\u003cli\u003eAddress setting via DIP switch or software\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Standard 9-pin D-sub or terminal block (depending on module)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus LEDs:\u003c\/strong\u003e Indicate communication, error, and power states\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Supplied via NP1L-PD2 module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount NP1L-PD2 on local base with adjacent PROFIBUS-DP master module\u003c\/li\u003e\n\u003cli\u003eEnsure proper grounding and shielding of PROFIBUS cable\u003c\/li\u003e\n\u003cli\u003eUse termination resistors at both ends of the PROFIBUS segment\u003c\/li\u003e\n\u003cli\u003eConfigure master-slave relationships and I\/O mapping in SX-Programmer\u003c\/li\u003e\n\u003cli\u003eVerify baud rate and address settings before commissioning\u003c\/li\u003e\n\u003cli\u003eMaintain ambient temperature within 0°C to +55°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FUJI","offers":[{"title":"Default Title","offer_id":42575441035331,"sku":"NP1L-PD2","price":266.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/5810\/3107\/files\/NP1L-PD2_3.png?v=1758016227","url":"https:\/\/www.plcdcspro.com\/products\/fuji-electric-np1l-pd2-local-power-supply-module","provider":"PLC DCS Pro Ltd.","version":"1.0","type":"link"}